Atv Help-2003 Honda Rancher 350 ES Oil and Oil Filter?

HELP!!! Ite I know this is a very noob question but I really need you guys help. I have lost the manual and I do not know how to change the oil and the filter. We also need to know what brand of oil goes in it. Thanks. (Once again this is a 2003 Honda Rancher 350.)Atv Help-2003 Honda Rancher 350 ES Oil and Oil Filter?Warm the engine up so the oil flows more easily. Start by removing the large bolt on the bottom of the engine (just look for the hole in the skid plate), and drain the oil. The oil filter cover is on the right side of the engine, just below the dipstick where you check the oil. The description is for a 400ex but they're pretty much the same http://www.atvriders.com/articles/oilcha

Use only honda filters for oil filters any other manufactures filter might not be right unless its a K%26amp;N. Make sure you put th enew filter in the same way the old one came out if not you can destroy your engine. After it's drained and filter back in close it all up and add some oil.



oil is important use a synthedic it's better on the engine, stuff like maxima or amsoil are good brands and can be found all over the place.



http://www.maximausa.com/products/4strok



https://www.amsoil.com/storefront/atm.asAtv Help-2003 Honda Rancher 350 ES Oil and Oil Filter?Do not use synthetic oil in your Honda Rancher which has a wet clutch. Use Honda GN4 10w40 and you will never have a clutch problem. Make sure you put the oil filter in the correct way or you will be in a bad way, it's stamped on the OEM Honda filters so use Honda OEM parts to make your ATV last a long time. You will see a circle on your engine with three bolts holding it on and under that will be your oil filter and on the bottom of the engine will be your drain plug.